Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Door Handle of Volkswagen ID 4

Model: Volkswagen Id 4 MK 1 - Years 2020-2026
Part: Handle

In this guide, you will find instructions to remove and replace the external front door handle of the Volkswagen ID 4. First, open the driver's side front door and start removing the front door panel by unscrewing all the fixing screws and disconnecting the electric connector of the window switch; from the inside, unscrew the screws of the external handle, disconnecting the electric connector to remove it, as shown in the video. At this point, replace and install the new opening handle, reassembling everything.

Posted on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door handle of the Volkswagen ID 4
Disassembly of the front door handle of the Volkswagen ID 4
Volkswagen Id 4 (2020-2026 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the outer handle of the front door of the Volkswagen ID 4. First of …
Guide to Removing the External Door Handle of the Volkswagen ID 4
Guide to Removing the External Door Handle of the Volkswagen ID 4
Volkswagen Id 4 (2020-2026 / MK 1) Discover how to remove and replace the external door handle of the front door of the Volkswagen ID 4 by following the instructions below. First, open…
Disassembly of the door panel of the Volkswagen ID 4.
Disassembly of the door panel of the Volkswagen ID 4.
Volkswagen Id 4 (2020-2026 / MK 1) In this guide, we will discover the process of disassembling and replacing the door panel of the Volkswagen ID 4. First, open the rear door and start…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos