Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the Fog Light on a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fog lights

See other generations:
Video tutorial

Removal of the fog light on a third generation Volkswagen Polo. Disassemble the side fog light located on the bumper. Use a suitable lever (screwdriver) to remove the plastic cover from the fog light and detach it from the bumper.

Once the plastic is removed, unscrew the screws of the fog light located at the sides (if present) and pull it out from the bumper (disconnect the power cable). Install the new fog light with a new bulb (same size and voltage).

Test the correct operation after installation (reverse the steps).


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to change the fog light bulb in the Volkswagen Polo
How to change the fog light bulb in the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) On the Volkswagen Polo, the replacement of the fog light bulb varies depending on the trim. In some diesel versions, the space behind the bumper is v…
Removing the Fog Light Installed on a Volkswagen Polo
Removing the Fog Light Installed on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) How to remove the fog light installed on a Volkswagen Polo. Disassemble the side fog light located on the bumper. Use a suitable lever or metal hook …
How to Replace the Fog Light Bulb on a Volkswagen Polo
How to Replace the Fog Light Bulb on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) If you need to replace the fog light bulb on this car model, the description below contains all the information and necessary steps for the replaceme…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos