Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

See other generations:
Video tutorial

We will briefly discover the instructions to remove and replace the factory radio of the Volkswagen Polo in simple steps. First, get into the vehicle and insert the appropriate extraction tools into the side holes of the radio to pull it out of the dashboard; then disconnect the wiring found at the back, as shown in the video.

At this point, carry out the repair or replace the radio with the new one, connecting it; check the operation of all radio stations.


Posted on 30 August 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Volkswagen Polo
How to Remove the Radio from a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) How do you remove the radio from a Volkswagen Polo? Watch this video carefully to see how to proceed with the removal. Using a plastic or metal spatu…
How to Remove and Replace the Radio in the Volkswagen Polo
How to Remove and Replace the Radio in the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) This short and simple guide outlines the steps to remove and replace the radio or standard multimedia system in the Volkswagen Polo. First, get insid…
Removing the Radio from a Polo
Removing the Radio from a Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Removing the radio from a Volkswagen Polo? It's a very simple operation, let's see how to do it. Remove the trim around the radio using a plastic lev…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos