Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling the front bumper of a Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

The instructions provided in this guide will allow you to disassemble the front bumper of a Volkswagen Golf. First, open the bonnet of the vehicle and start unscrewing all the fixing screws found on the top and bottom of the bumper; remove the additional screws located on both sides of the front wheel arches, as shown in the video.

At this point, lever the bumper until it detaches completely, then proceed with repair or replacement; securely attach the new front bumper with all screws, applying the reverse procedure!


Posted on 7 September 2026 by ScegliAuto


Related tutorials

Guide to disassembling the front bumper of the Volkswagen Golf
Guide to disassembling the front bumper of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The steps outlined in this guide will allow us to dismantle and replace the front bumper of the Volkswagen Golf. First, we open the hood of the car a…
Removing the Front Bumper of the Volkswagen Golf
Removing the Front Bumper of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will discover the instructions that will allow you to remove and replace the front bumper of the Volkswagen Golf in simple steps. First, op…
Removing the Front Bumper on Golf 4
Removing the Front Bumper on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Replacing the front bumper on the Golf 4? Not sure how to do it? Unscrew the fastening bolts located at the top of the bumper (after removing the fro…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos