Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

When the windscreen wiper motor stops working, it is necessary to check the related fuse before proceeding with its replacement. On a 2011 Volkswagen Golf, the fuse for its operation is located inside the box situated in the engine bay. To replace it, open the front bonnet and remove the cover of the box; using pliers, extract fuse number 19, which is 10 Amperes.

Insert a new fuse of the same amperage. Close the cover of the box and test the operation of the wiper arm; if the problem persists, it is important to check the connector of the motor.


Posted on 16 September 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) Today we will discover the steps that will allow us to disassemble and replace the rear windshield wiper motor of the Volkswagen Golf. First, we open…
Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) Start the replacement of the rear wiper motor by removing the cap at the base of the wiper arm and unscrewing the bolt underneath it. Next, open the …
Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) In this video, learn how to remove the rear wiper motor from a sixth-generation Volkswagen Golf in simple steps. First, open the boot and remove the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Golf 2008-2012 - What is the position of the starter relay in the Volkswagen Golf mk6? Read answer
    • Golf 2008-2012 - Where is the Volkswagen Golf 6 reverse light fuse located? Read answer
    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer

Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris

These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end!

Watch the video!


by ScegliAuto

More videos