Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Volkswagen Up?

Model: Volkswagen Up - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Timing belt

Video tutorial

Today, I will explain how to replace the timing belt on the Volkswagen Up. To carry out the replacement, open the front bonnet and using a 16 mm socket wrench, loosen the pulley nut. Remove the timing belt by sliding it off the pulley. Insert the new belt into the pulley and tighten the rollers, tensioning the belt.

Ensure to set the roller to the torque specified in the owner's manual. Finally, close the front bonnet and start the vehicle to ensure the belt is properly tightened.


Posted on 10 November 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Volkswagen Up 1.0 TSI
Guide to replacing the timing belt of the Volkswagen Up 1.0 TSI
Volkswagen Up (2011-2024 / MK 1) Today's information will show us how to disassemble and replace the timing belt of the Volkswagen Up 1.0 TSI. To access the timing belt, it will be n…
Guide to Replacing the Timing Belt on the Volkswagen Up 1.0 MPI
Guide to Replacing the Timing Belt on the Volkswagen Up 1.0 MPI
Volkswagen Up (2011-2024 / MK 1) This guide outlines the steps for removing and replacing the timing belt on the Volkswagen Up 1.0 MPI. First, open the bonnet of the vehicle and begi…
Replacing the Timing Belt on the Volkswagen Up! 1.0 MPI
Replacing the Timing Belt on the Volkswagen Up! 1.0 MPI
Volkswagen Up (2011-2024 / MK 1) In this video tutorial, follow the main steps to remove and replace the timing belt on the Volkswagen Up! 1.0 MPI. First, open the bonnet of your car…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos