Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Boot Lock on a Volkswagen Golf

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Door lock

In today’s tutorial, we will see how to remove the lock and handle of the boot on a fourth-generation Volkswagen Golf. First, open the boot and remove the screws from the internal plastic panel, which are located in the grab handles. Then, pull the panel to detach and extract it. Disconnect the boot opening mechanism as shown in the video: using a screwdriver, detach the levers and springs. Now, unscrew the screws holding the lock with a T20 Torx screwdriver and extract it by levering from the outside!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Below are the steps that will allow you to open the jammed rear boot lid of a Volkswagen Golf in an emergency. When the boot lid handle is stuck, you…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video, you will learn how to open a non-functioning boot lid due to a locking issue on a Volkswagen Golf fifth series. You can proceed to eme…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This guide will illustrate the steps to remove and replace the tailgate panel of the Volkswagen Golf. First, open the tailgate and start unscrewing t…

    Frequently Asked Questions

    • Golf 2003-2008 - What to do if the door on Golf 5 does not open? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos