Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Seat in Volkswagen

Model: Volkswagen Volkswagen Various
Part: Seat

Today, learn how to remove the rear seat in some Volkswagen models. First, access the rear of the car and remove the plastic covers using a lever: once removed, lift the rear seat firmly until it disengages; pull from both sides of the seat to fully detach and extract it from the car. Under the rear seat, you can access the float of the fuel tank. To reassemble the seat, simply click it back into place until you hear it lock and replace the covers, as shown in the video!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to lower the seat of a Volkswagen
How to lower the seat of a Volkswagen
Volkswagen Volkswagen Various In today's video tutorial, we will see how to lower the seat of a Volkswagen vehicle. So, Volkswagen vehicles have three levers for adjusting the sea…
How to Deactivate the Passenger Airbag on a Volkswagen
How to Deactivate the Passenger Airbag on a Volkswagen
Volkswagen Volkswagen Various If you need to deactivate the passenger airbag in your car to install a child seat on the passenger seat, it is essential to do so. First, access the…
How to Replace the Remote Key Battery on a Volkswagen
How to Replace the Remote Key Battery on a Volkswagen
Volkswagen Volkswagen Various When the remote key for your vehicle no longer responds and fails to unlock the doors or central locking, it is time to replace the battery inside. T…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos