Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Interior Lights in a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Interior dome light bulb

In this video tutorial, you will learn how to remove and replace the interior lights of a seventh-generation Volkswagen Golf, specifically the Variant version. Start by removing the rear light's ceiling light by prying it with a sharp object: disconnect the electrical connector and remove the old bulb to replace it (in this case, LED bulbs are fitted). Next, pry down the central ceiling light and perform the same operation as before; repeat the same process for the front light, following the video until the end!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the interior light bulbs of the Volkswagen Golf?
How to replace the interior light bulbs of the Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the interior light bulbs of the Volkswagen Golf, use a tool like a screwdriver to pry open the corresponding light fixture: this will allo…
How to change the interior light fitting of the Volkswagen Golf
How to change the interior light fitting of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This brief and simple guide outlines the steps to remove and replace the interior light fitting of the Volkswagen Golf. First, get inside the vehicle…
Replacement of the Volkswagen Golf stop light bulb
Replacement of the Volkswagen Golf stop light bulb
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In a few simple steps, we will see how to disassemble and replace the stop light bulb of the rear light of the Volkswagen Golf. First, open the rear …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos