Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Light Bulbs on Volkswagen Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Tail light bulb

Lift the boot lid and remove the plastic cover on the inside of the boot, behind the affected light. To remove this cover, use a plastic wedge to pry it open at the seams. At this point, disconnect the connector and manually pull out the housing where the bulbs are fixed. Once done, unscrew any burnt-out bulb and fit the new one. Reassemble the housing and reconnect the connector, fit the cover back, and check the correct operation of all the bulbs. It's that simple!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs in the Volkswagen Golf?
How to replace the rear headlight bulbs in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this tutorial we can see how to replace the rear headlight bulbs in the Volkswagen Golf, an extremely simple and quick operation. First of all, ma…
How to replace the rear headlight bulbs in the Volkswagen Golf?
How to replace the rear headlight bulbs in the Volkswagen Golf?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) In this tutorial we can see how to replace the rear headlight bulbs in the Volkswagen Golf, a very simple and quick operation. First of all, make sur…
Replacing Rear Bulbs on a Volkswagen Golf
Replacing Rear Bulbs on a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Open the boot lid and notice the side covers located near the rear lights, which are fitted into the boot lining. Remove the cover for the affected l…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos