Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel from a VW Touran

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

Do you want to remove the door panel from the Touran? Let’s see how to take off the cover panel. Detach the plastic covering the inner handle, then unscrew the retaining screws located in the door panel.

Remove the window switch and disconnect the electrical connector. Remove the cover panel from above the side door (use a plastic or metal lever to assist), and disconnect the power connectors.

Take off the cover section that conceals the door if you want to access the internal components. Replace the door panel if it is damaged.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to adjust the handbrake cable on a Volkswagen Touran
How to adjust the handbrake cable on a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Today, we will discover the main instructions that will allow us to adjust the handbrake cable on a Volkswagen Touran. First, get inside the vehicle …
How to adjust the handbrake of the Volkswagen Touran.
How to adjust the handbrake of the Volkswagen Touran.
Volkswagen Touran (2003-2015 / 1T, MK 1) We will briefly see the instructions that will allow us to adjust the handbrake of the Volkswagen Touran. First, let’s get inside the vehicle and sta…
Where is the Fuse Diagram in the 2006 Volkswagen Touran?
Where is the Fuse Diagram in the 2006 Volkswagen Touran?
Volkswagen Touran (2003-2015 / 1T, MK 1) This video fully represents what it means to deal with a fuse check in the event of a fault or malfunction. Fuses are responsible for protecting all …

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos