Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the external door handle on the Volkswagen Touran

Model: Volkswagen Touran 5T, MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Handle

See other generations:
Video tutorial

Below are the instructions on how to disassemble and replace the external door handle on the Volkswagen Touran. First, open the vehicle door and start by unfastening the handle mechanism located inside the side hole (removing the cap); then unclip the rectangular cover of the external handle, subsequently removing the entire handle from the door, as shown in the video.

At this point, perform the replacement or repair of the handle, securing it correctly to the door via the side mechanism; reattach the small plastic cap of the hole.


Posted on 28 April 2026 by ScegliAuto


Related tutorials

How to Remove the External Handle on a Volkswagen Touran
How to Remove the External Handle on a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) To remove the external handle on a Volkswagen Touran, open the door and remove the rubber grommet located at the end of the door, near the external h…
Replace VW Touran Door Handle
Replace VW Touran Door Handle
Volkswagen Touran (2003-2015 / 1T, MK 1) Follow these steps to remove the external door handle of a Volkswagen Touran. Open the door and locate the securing screw on the side. Use a screwdri…
How to remove the handle of a Volkswagen Touran?
Volkswagen Touran (2015-2024 / 5T, MK 2) To remove the handle of a Volkswagen Touran, first open the door. Then, locate and unscrew the screws that secure the handle to the door. Once the sc…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos