Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Touran - Handle

Handle Volkswagen Touran (2015-2024 / 5 t, mk 2)

Volkswagen Touran (2015-2024 / 5T, MK 2)
Guide to replacing the external door handle on the Volkswagen Touran
Below are the instructions on how to disassemble and replace the external door handle on the Volkswagen Touran. First, open the vehicle door and start by …Read all…
Posted on 28 April 2026 by ScegliAuto
Volkswagen Touran (2015-2024 / 5T, MK 2)
How to remove the handle of a Volkswagen Touran?
To remove the handle of a Volkswagen Touran, first open the door. Then, locate and unscrew the screws that secure the handle to the door. Once the screws have …Read all…
Posted on 18 December 2024 by ScegliAuto
Volkswagen Touran (2003-2015 / MK 1, 1T)
How to Remove the External Handle on a Volkswagen Touran
To remove the external handle on a Volkswagen Touran, open the door and remove the rubber grommet located at the end of the door, near the external handle. …Read all…
Posted on 28 July 2026 by ScegliAuto
Volkswagen Touran (2003-2015 / MK 1, 1T)
Replace VW Touran Door Handle
Follow these steps to remove the external door handle of a Volkswagen Touran. Open the door and locate the securing screw on the side. Use a screwdriver to …Read all…
Posted on 16 June 2026 by ScegliAuto

Handle Volkswagen Touran (2003-2015 / mk 1, 1 t)

Volkswagen Touran (2015-2024 / 5T, MK 2)
Guide to replacing the external door handle on the Volkswagen Touran
Below are the instructions on how to disassemble and replace the external door handle on the Volkswagen Touran. First, open the vehicle door and start by …Read all…
Posted on 28 April 2026 by ScegliAuto
Volkswagen Touran (2015-2024 / 5T, MK 2)
How to remove the handle of a Volkswagen Touran?
To remove the handle of a Volkswagen Touran, first open the door. Then, locate and unscrew the screws that secure the handle to the door. Once the screws have …Read all…
Posted on 18 December 2024 by ScegliAuto
Volkswagen Touran (2003-2015 / MK 1, 1T)
How to Remove the External Handle on a Volkswagen Touran
To remove the external handle on a Volkswagen Touran, open the door and remove the rubber grommet located at the end of the door, near the external handle. …Read all…
Posted on 28 July 2026 by ScegliAuto
Volkswagen Touran (2003-2015 / MK 1, 1T)
Replace VW Touran Door Handle
Follow these steps to remove the external door handle of a Volkswagen Touran. Open the door and locate the securing screw on the side. Use a screwdriver to …Read all…
Posted on 16 June 2026 by ScegliAuto
Airbag (2) Car stereo (12) Roof rack bars (2) Battery (5) Air vents (4) Transmission (2) Convertible top (1) Glove compartment (2) Control unit (1) Key (20) Trunk lock (2) Timing belt (5) V-belt (2) Air conditioner (5) Onboard computer (2) Checks and maintenance (21) Dashboard (2) Side marker light (1) Headlight (1) Tail light (4) Air filter (5) Cabin air filter (5) Diesel fuel filter (3) Oil filter (2) Parking brake (5) Clutch (1) Light bulb (3) Side marker bulb (1) Headlight bulb (8) Tail light bulb (10) (1) Handle (4) Power window motor (1) Starter motor (2) Engine oil (4) Clock (10) Door trim panel (17) Front bumper (6) Rear bumper (1) Fuel pump (4) Car door (3) Power window switch (1) Instrument cluster (1) Heater core (1) Fuse box (50) Seat (8) Crankshaft position sensor (1) Door lock (5) Side mirror (5) Rearview mirror (1) AdBlue warning light (4) Warning light – error code (13) (14) Tire pressure warning light (5) Service warning light (80) Windshield wipers (4) Turbocharger (1) EGR valve (2) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos