Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touran
    4. : Turbocharger

Volkswagen Touran - Turbocharger

Turbocharger Volkswagen Touran (2003-2015 / mk 1, 1 t)

Volkswagen Touran (2003-2015 / MK 1, 1T)
How to Replace the Turbo on a Volkswagen Touran
To replace the turbo on your Volkswagen Touran, first remove the fuel filter by disconnecting the connector—this clip is on the right side. Next, remove the …Read all…
Posted on 21 September 2026 by ScegliAuto
Airbag (2) Car stereo (12) Roof rack bars (2) Battery (5) Air vents (4) Transmission (2) Convertible top (1) Glove compartment (2) Control unit (1) Key (20) Trunk lock (2) Timing belt (5) V-belt (2) Air conditioner (5) Onboard computer (2) Checks and maintenance (21) Dashboard (2) Side marker light (1) Headlight (1) Tail light (4) Air filter (5) Cabin air filter (5) Diesel fuel filter (3) Oil filter (2) Parking brake (5) Clutch (1) Light bulb (3) Side marker bulb (1) Headlight bulb (8) Tail light bulb (10) (1) Handle (4) Power window motor (1) Starter motor (2) Engine oil (4) Clock (10) Door trim panel (17) Front bumper (6) Rear bumper (1) Fuel pump (4) Car door (3) Power window switch (1) Instrument cluster (1) Heater core (1) Fuse box (50) Seat (8) Crankshaft position sensor (1) Door lock (5) Side mirror (5) Rearview mirror (1) AdBlue warning light (4) Warning light – error code (13) (14) Tire pressure warning light (5) Service warning light (80) Windshield wipers (4) Turbocharger (1) EGR valve (2) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos