Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turbo on a Volkswagen Touran

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Turbocharger

See other generations:
Video tutorial

To replace the turbo on your Volkswagen Touran, first remove the fuel filter by disconnecting the connector—this clip is on the right side. Next, remove the engine cover, battery, and air filter.

Once everything is removed, locate the turbo actuator, disconnect the connector and pipes. Now unscrew the three screws that hold it in place, which are on the right side of the unit.

At the back, it is secured by a circlip that you can remove gently with your fingers. You can now reinstall the new (or refurbished, as shown in the video) turbo by fitting the turbo bar into its housing and reattaching the circlip.

Refit the three bolts; reposition the battery, air filter, engine cover, and fuel filter. The job is complete.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box on a Volkswagen Touran Mk2
Where to Find the Fuse Box on a Volkswagen Touran Mk2
Volkswagen Touran (2015-2024 / 5T, MK 2) In the event of electrical faults affecting one or more components in your Volkswagen Touran Mk2, you will need to address the respective fuses. With…
How to Replace the Timing Belt on a Volkswagen Touran?
How to Replace the Timing Belt on a Volkswagen Touran?
Volkswagen Touran (2003-2015 / 1T, MK 1) Good morning, today you will be replacing the timing belt on your Volkswagen Touran. Start by opening the bonnet. Next, remove the air filter assembl…
How to Reset the "Service" Light on a Volkswagen Touran
How to Reset the "Service" Light on a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Before you can begin, sit in the driver's seat of your Volkswagen Touran. Start by pressing and holding the right button located within the instrumen…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos