|
Do it yourself
| |||
| ||||
How to change the air filter of the Volkswagen Touran DIY (do it yourself)
Model: Volkswagen Touran
MK 1, 1T
- Years 2003-2015
To replace the engine air filter on a Volkswagen Touran, park on a flat surface, turn off the engine, and wait for the engine compartment to cool down. Open the hood and locate the air filter box (airbox), which is the plastic container connected to the intake duct. Remove any covers that obstruct access and clear the area around the airbox. Depending on the model, the cover is secured with metal/plastic clips or screws: release or unscrew them enough to lift the cover without forcing it. Carefully lift the cover, avoiding pulling on nearby hoses or wiring. Remove the old air filter and note its orientation: the new one should be inserted in the same direction and must fit properly in its place. Before installing the new filter, clean the inside of the airbox of leaves and dust (without letting dirt fall into the intake duct) and ensure that the sealing surface is clean. Insert the new filter, making sure it sits properly on all sides. Close the airbox cover and reattach all clips or screw the screws back in evenly, without overtightening. Reattach any removed covers, close the hood, and start the engine for a quick check: there should be no unusual vibrations or intake noises caused by an improperly closed cover.
Posted on 30 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Touran
(2003-2015 /
MK 1, 1T)
Following these brief and simple steps, we will see how to replace the air filter of the engine of the Volkswagen Touran 1.9 TDI. First, we open the …
Volkswagen Touran
(2003-2015 /
MK 1, 1T)
In this video tutorial, see how to replace the air filter on a Volkswagen Touran by following a few simple steps: first, purchase a new air filter fr…
Volkswagen Touran
(2015-2024 /
5T, MK 2)
To replace the engine air filter on this vehicle model, the video and text below provide all the useful instructions and necessary steps to carry out…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.501
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |