Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Touran - Clutch

Clutch Volkswagen Touran (2003-2015 / mk 1, 1 t)

Volkswagen Touran (2003-2015 / MK 1, 1T)
How to Replace the Clutch Pump on the Volkswagen Touran?
To replace the clutch pump on the Volkswagen Touran, you need to remove the plastic panel located behind the pedal box to access the underlying components. …Read all…
Posted on 28 July 2026 by ScegliAuto
Airbag (2) Car stereo (12) Roof rack bars (2) Battery (5) Air vents (4) Transmission (2) Convertible top (1) Glove compartment (2) Control unit (1) Key (20) Trunk lock (2) Timing belt (5) V-belt (2) Air conditioner (5) Onboard computer (2) Checks and maintenance (21) Dashboard (2) Side marker light (1) Headlight (1) Tail light (4) Air filter (5) Cabin air filter (5) Diesel fuel filter (3) Oil filter (2) Parking brake (5) Clutch (1) Light bulb (3) Side marker bulb (1) Headlight bulb (8) Tail light bulb (10) (1) Handle (4) Power window motor (1) Starter motor (2) Engine oil (4) Clock (10) Door trim panel (17) Front bumper (6) Rear bumper (1) Fuel pump (4) Car door (3) Power window switch (1) Instrument cluster (1) Heater core (1) Fuse box (50) Seat (8) Crankshaft position sensor (1) Door lock (5) Side mirror (5) Rearview mirror (1) AdBlue warning light (4) Warning light – error code (13) (14) Tire pressure warning light (5) Service warning light (80) Windshield wipers (4) Turbocharger (1) EGR valve (2) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos