Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump on the Volkswagen Touran?

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Clutch

See other generations:
Video tutorial

To replace the clutch pump on the Volkswagen Touran, you need to remove the plastic panel located behind the pedal box to access the underlying components. Here, just behind the clutch pedal, you will find the pump: before accessing it, you must loosen the bolt that secures the clutch pedal and disconnect it. At this point, you can unscrew the screws that secure the clutch pump to its supports and replace it with a new spare part; after the replacement, you can also reattach the clutch pedal.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Pump on a Volkswagen Touran?
How to Replace the Diesel Pump on a Volkswagen Touran?
Volkswagen Touran (2003-2015 / 1T, MK 1) To remove the diesel pump from the Volkswagen Touran, loosen the screws securing the rear seat at the front and rear of the seat itself. Once these s…
How to Replace the Fuel Pump on a Volkswagen Touran?
How to Replace the Fuel Pump on a Volkswagen Touran?
Volkswagen Touran (2015-2024 / 5T, MK 2) To replace the fuel pump on a Volkswagen Touran, lift the rear seats by pulling the lever located on the side of the seat and then grasping the handl…
How to Reset the "Service" Light on a Volkswagen Touran
How to Reset the "Service" Light on a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Before you can begin, sit in the driver's seat of your Volkswagen Touran. Start by pressing and holding the right button located within the instrumen…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos