Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Master Cylinder of the Clutch on the Volkswagen Golf MK7?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Clutch

Thanks to the tutorial video available here, you will have a clear idea of how to carry out the work described, which is not very easy, but with some effort and skill, it can be tackled. Open the front bonnet, proceed to remove the air filter box and the manifold to create space for working, then disconnect the cable clip for the wires supplying the cylinder in question, and for now, there is nothing else to do here; move to the cabin. Now, remove the lower part of the dashboard on the driver's side to access the cylinder, located under the clutch pedal, and remove it. For the installation of the replacement part, proceed in reverse order.

Posted on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch cylinder of the Volkswagen Golf?
How do you replace the clutch cylinder of the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The procedure for replacing the clutch cylinder on the Volkswagen Golf involves opening the hood so that access to the back of the engine compartment…
How to Replace the Clutch Cylinder on a Volkswagen Golf?
How to Replace the Clutch Cylinder on a Volkswagen Golf?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To replace the clutch cylinder on a Volkswagen Golf, open the bonnet to access the rear of the engine bay. Here, locate the screws securing the clutc…
How to replace the clutch cylinder on a Volkswagen Golf?
How to replace the clutch cylinder on a Volkswagen Golf?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the clutch cylinder on a Volkswagen Golf, you need to completely remove the clutch pedal, disconnecting the panel located behind the pedal…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos