Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on a Volkswagen Golf?

Model: Volkswagen Golf MK 2, Golf 2 - Years 1983-1992
Part: Clutch

In this tutorial, see how to replace the clutch cable on a Volkswagen Golf, a simple task but one that requires good manual skills. First, ensure the engine is completely cold, then open the bonnet, locate the cable in question, slightly lift the lever, and remove the lower metal clip. Next, disconnect the cable from the support, go inside the cabin, and disconnect the opposite end from the pedal. Now, simply pull the cable from the wall, insert the replacement, and reconnect it following the reverse procedure.

Posted on 31 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Clutch Pedal Pump on Golf 5
Removing the Clutch Pedal Pump on Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Is the clutch pedal pump on your Golf 5 not working anymore? Let's see how to remove it. Lift the bonnet and secure it, then access the clutch pedal …
How to Replace the Clutch Cylinder on a Volkswagen Golf?
How to Replace the Clutch Cylinder on a Volkswagen Golf?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To replace the clutch cylinder on a Volkswagen Golf, open the bonnet to access the rear of the engine bay. Here, locate the screws securing the clutc…
How do you replace the clutch cylinder of the Volkswagen Golf?
How do you replace the clutch cylinder of the Volkswagen Golf?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The procedure for replacing the clutch cylinder on the Volkswagen Golf involves opening the hood so that access to the back of the engine compartment…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos