Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on the Volkswagen Golf 5?

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Clutch

See other generations:
Video tutorial

To replace the clutch on the Volkswagen Golf 5, lift the car using a jack or ramp to access the screws securing the front right wheel, then remove the wheel completely. Once the wheel is removed, unscrew the two drive shafts and access the screws that secure the gearbox to its supports.

The gearbox can then be removed from its housing, locating the clutch release bearing on the side of the engine block. Extract the release bearing, detaching the old clutch from the diaphragm spring.

You can now insert the new clutch and reassemble all the removed components.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Volkswagen Golf Mk4?
How to Replace the Clutch on a Volkswagen Golf Mk4?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the clutch on a Volkswagen Golf Mk4, lift the car to gain easier access to the components in the lower part of the engine bay. First, remo…
How to Replace the Clutch Pump of the Volkswagen Golf VII
How to Replace the Clutch Pump of the Volkswagen Golf VII
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) If you notice any oil droplets on the mat of your Volkswagen Golf VII or if the clutch pedal feels a bit "slack", as our YouTuber says, it means the …
How to Replace the Clutch on a Volkswagen Golf?
How to Replace the Clutch on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the clutch on a Volkswagen Golf, you need to remove the front left wheel by unscrewing its bolts. After that, loosen the screws securing t…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos