Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Master Cylinder on a Volkswagen Golf Plus

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the clutch master cylinder on a Volkswagen Golf Plus, following the instructions below. First, open the bonnet and start by removing the upper plastic cover; then disconnect the turbo intake pipe and the air filter box hose, as shown in the video.

At this point, locate the clutch master cylinder; disconnect the pipes, allowing the fluid to drain, to remove it and replace it with the new one, following the video until the end!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Remove the Clutch Pedal Pump from the Volkswagen Golf
How to Remove the Clutch Pedal Pump from the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) This guide provides the main instructions on how to remove and replace the master cylinder or clutch pedal pump of the Volkswagen Golf. First, open t…
How to Replace the Master Cylinder of the Clutch on the Volkswagen Golf MK7?
How to Replace the Master Cylinder of the Clutch on the Volkswagen Golf MK7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Thanks to the tutorial video available here, you will have a clear idea of how to carry out the work described, which is not very easy, but with some…
How to Replace the Clutch on a Volkswagen Golf?
How to Replace the Clutch on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the clutch on a Volkswagen Golf, you need to remove the front left wheel by unscrewing its bolts. After that, loosen the screws securing t…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos