|
Do it yourself
| |||
| ||||
How to replace the air filter on a Volkswagen Golf VII?
Model: Volkswagen Golf
MK 7, Golf 7, Golf VII
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
Let's see how to change the air filter on a Volkswagen Golf VII. The air filter is located in a black plastic housing on the right side of the engine bay; unlock the clips with a screwdriver by pressing the plastic tabs; some models may also have a small bolt at the bottom. Disconnect the electrical connector of the airflow sensor mounted on the cover and open the box; you may need to unclip the flexible hose that goes to the engine, remove the used filter, clean the inside of the box from dust and debris, and insert the new filter, ensuring the correct orientation. Refit the cover, making sure all clips are securely closed. Reconnect the air hose and the sensor. Check that everything is in place and you're done.
Posted on 15 August 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
The air filter on a Volkswagen Golf model mk7 is located under the front bonnet, specifically on the right side near the air duct and engine. To repl…
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
To replace the air filter on the Volkswagen Golf 7, open the bonnet to locate the box containing the filter, which is situated at the front right of …
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
In this new mini guide dedicated to your seventh-generation Volkswagen Golf (2017), you will discover the various steps to safely and independently r…
Other guides you may be interested in
|
How to Open the Bonnet of a Toyota C-HR
To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.074
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
