Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch on the Volkswagen Golf 1.9 TDI

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Clutch

See other generations:
Video tutorial

This guide will show you the procedure for removing and replacing the clutch kit on the Volkswagen Golf 1.9 TDI. First, raise the vehicle and start draining the engine oil; then remove the right front wheel and the wheel arch liner, disconnecting the front driveshaft by unscrewing the fastening bolts, as shown in the video.

At this point, remove the battery and the air filter housing, then unscrew the bolts of the clutch cover and separate the gearbox, following the video tutorial until the end for the replacement!


Updated on 28 October 2026 by ScegliAuto


Related tutorials

Replacing the Clutch Pedal Switch on the Volkswagen Golf
Replacing the Clutch Pedal Switch on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This guide will show you the procedure for removing and replacing the clutch pedal switch on the Volkswagen Golf. First, get into the driver's side o…
Replacement of the timing belt of the Volkswagen Golf 1.6 TDI
Replacement of the timing belt of the Volkswagen Golf 1.6 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The instructions in this guide will show us the procedure for disassembling and replacing the timing belt of the Volkswagen Golf 1.6 TDI. First, we l…
Guide to replacing the timing belt of the Volkswagen Golf 2.0 TDI
Guide to replacing the timing belt of the Volkswagen Golf 2.0 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below we will see the main information regarding the disassembly and replacement of the timing belt of the Volkswagen Golf 2.0 TDI. First, we open th…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos