Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Volkswagen Golf 1.6 TDI

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

The instructions in this guide will show us the procedure for disassembling and replacing the timing belt of the Volkswagen Golf 1.6 TDI. First, we lift the vehicle and start by removing the front right wheel and the wheel arch, disconnecting the V-belt and removing the crankshaft pulley; then we disconnect the coolant pipe, then remove the coolant tank and the engine support, as shown in the video.

At this point, we remove the distribution cover, then proceed with the replacement of the belt; if necessary, we also replace the water pump kit.


Posted on 22 October 2025 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Volkswagen Golf 2.0 TDI
Replacement of the timing belt of the Volkswagen Golf 2.0 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today we will see the instructions on how to remove and replace the timing belt of the Volkswagen Golf 2.0 TDI. First, we open the hood of the car an…
Replacement of the water pump and timing belt of the Volkswagen Golf 2.0 TDI
Replacement of the water pump and timing belt of the Volkswagen Golf 2.0 TDI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this guide, we will discover the instructions that will allow us to dismantle and replace the water pump and timing belt of the Volkswagen Golf 2.…
Replacing the Timing Belt on a Volkswagen Golf 1.6 TDI
Replacing the Timing Belt on a Volkswagen Golf 1.6 TDI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this guide, you will learn the main instructions on how to remove and replace the timing belt on a Volkswagen Golf 1.6 TDI. First, open the engine…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos