Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Water Pump on Volkswagen Golf 1.4 TSI

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Pump

See other generations:
Video tutorial

Today's guide will illustrate the main steps on how to remove and replace the water pump on the Volkswagen Golf 1.4 TSI. First, open the vehicle's bonnet and begin by removing the battery and battery tray, then remove the timing cover. To remove the water pump, it is necessary to take off the timing belt, first noting the necessary references.

At this point, disconnect the coolant hoses and unscrew the screws of the water pump casing, replacing it with the new original one; then reassemble all other components!


Posted on 19 February 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Below is the guide showing the procedure for removing and replacing the water pump on a Volkswagen Golf 1.4 TSI. First, open the bonnet of the vehicl…
Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.4 TSI
Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below are the main instructions for removing and replacing the water pump and timing belt on the Volkswagen Golf 1.4 TSI. First, open the bonnet of y…
How to Replace the Water Pump on a Volkswagen Tiguan 1.4 TSI
How to Replace the Water Pump on a Volkswagen Tiguan 1.4 TSI
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Replace the water pump on a Volkswagen Tiguan with a 1.4 TSI engine. Accessing the TSI engine is not easy; there is very little space, but you can do…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos