Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Battery

See other generations:
Video tutorial

To replace the battery in a Volkswagen Golf, open the bonnet and locate the battery in the engine compartment, generally on the right side. Remove the protective cover above the battery.

Using a 10 mm or 13 mm spanner, disconnect the negative terminal first and then the positive terminal. Loosen and remove the retaining bracket that secures the battery to the base.

Carefully lift the old battery out of its housing. Insert the new battery in the same orientation, refit the bracket, and reconnect the terminals, starting with the positive and then the negative.

Ensure the battery is stable and close the bonnet.


Posted on 14 September 2026 by ScegliAuto


Related tutorials

When and How to Replace the Battery on a Volkswagen Golf
When and How to Replace the Battery on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This guide explains how and when to replace the battery on a Volkswagen Golf, following the instructions below. Replace the battery as soon as the ve…
How to Replace the Battery in a Volkswagen Golf 6
How to Replace the Battery in a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Here are the steps to safely and independently replace the battery in your Volkswagen Golf Mk6 (2008-2012). First, ensure the car is turned off after…
How to Replace the Starter Motor on a Volkswagen Golf
How to Replace the Starter Motor on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The procedure to replace the starter motor on a Volkswagen Golf involves opening the bonnet and completely disconnecting and removing the car battery…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos