Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt on the Volkswagen Golf GTI?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: V-belt

See other generations:
Video tutorial

In this tutorial, you can see how to replace the auxiliary belt on the Volkswagen Golf GTI, a very simple operation. First, lift the front right side of the vehicle, then remove both the wheel and the inner wheel arch cover.

Next, disconnect the intercooler hose, separate it from the support, grasp the tensioner with a 17mm spanner, and once secured by inserting a hex key into the indicated hole, remove the old belt. Now position the replacement while following the diagram and reassemble everything in reverse order.


Posted on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator on a Volkswagen Golf GTI
How to Replace the Alternator on a Volkswagen Golf GTI
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, follow these steps to replace the alternator on your Volkswagen Golf GTI with a TSI engine. First, open the bonnet of your car and remove the …
How to Replace the Air Conditioning Pressure Switch on Volkswagen Golf GTI
How to Replace the Air Conditioning Pressure Switch on Volkswagen Golf GTI
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This guide outlines the steps to remove and replace the air conditioning pressure sensor on the Volkswagen Golf GTI. First, open the bonnet and locat…
How to Replace the GTI Badge on the Bodywork of the Volkswagen Golf
How to Replace the GTI Badge on the Bodywork of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, we will see the instructions that will allow us to replace the GTI badge on the bodywork of the Volkswagen Golf. To remove the GTI bad…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos