Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace VW Touran Door Handle

Model: Volkswagen Touran MK 1, 1T - Years 2003-2015
Part: Handle

Follow these steps to remove the external door handle of a Volkswagen Touran. Open the door and locate the securing screw on the side. Use a screwdriver to unscrew the screw located on the side of the door (as shown in the video), remove the cylinder next to the handle, then slide the handle to the left of the door. Remove the door opening handle and insert the new piece of the same type into the door. Secure the new handle inside the door, fix the lock cylinder, and screw the screw back in place. Test the operation of the door handle.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the external door handle on the Volkswagen Touran
Guide to replacing the external door handle on the Volkswagen Touran
Volkswagen Touran (2015-2024 / 5T, MK 2) Below are the instructions on how to disassemble and replace the external door handle on the Volkswagen Touran. First, open the vehicle door and star…
How to remove the handle of a Volkswagen Touran?
Volkswagen Touran (2015-2024 / 5T, MK 2) To remove the handle of a Volkswagen Touran, first open the door. Then, locate and unscrew the screws that secure the handle to the door. Once the sc…
How to Remove the External Handle on a Volkswagen Touran
How to Remove the External Handle on a Volkswagen Touran
Volkswagen Touran (2003-2015 / MK 1, 1T) To remove the external handle on a Volkswagen Touran, open the door and remove the rubber grommet located at the end of the door, near the external h…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos