Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Handle on a Volkswagen Touran

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Handle

See other generations:
Video tutorial

To remove the external handle on a Volkswagen Touran, open the door and remove the rubber grommet located at the end of the door, near the external handle. Once the grommet is removed, you can unscrew the underlying screw, which will allow you to slide out the end part of the handle.

Once this is removed, you can grasp the actual handle so that it can also be removed by disengaging the mechanism. Once the old handle is removed, a new one can be installed, with the corresponding end part that must be secured with the appropriate screw.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

Replace VW Touran Door Handle
Replace VW Touran Door Handle
Volkswagen Touran (2003-2015 / 1T, MK 1) Follow these steps to remove the external door handle of a Volkswagen Touran. Open the door and locate the securing screw on the side. Use a screwdri…
How to remove the handle of a Volkswagen Touran?
Volkswagen Touran (2015-2024 / 5T, MK 2) To remove the handle of a Volkswagen Touran, first open the door. Then, locate and unscrew the screws that secure the handle to the door. Once the sc…
Guide to replacing the external door handle on the Volkswagen Touran
Guide to replacing the external door handle on the Volkswagen Touran
Volkswagen Touran (2015-2024 / 5T, MK 2) Below are the instructions on how to disassemble and replace the external door handle on the Volkswagen Touran. First, open the vehicle door and star…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos