Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Headlamp from a Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Headlight

Before you can start removing the front headlamp, you must open the bonnet and remove the bumper. To do this, you will need to unscrew the visible screws in the front wheel arch using a T25 Torx screwdriver. Once those screws are removed, proceed to remove the screws located at the top of the bumper with a T30 Torx screwdriver. At this point, you will need to remove the air ducts located at the bottom of the bumper by simply pulling them out. This will give you access to two screws, which you will unscrew and remove, freeing up space to work properly on the headlights. Start by unscrewing the two screws located at the top of the headlamp, then unscrew another two screws located at the bottom of the headlamp. Once you have finished unscrewing all the screws, you can pull the headlamp out of its housing; however, before you can remove it completely, you will need to turn the headlamp 180 degrees and disconnect the connector with the help of a flat screwdriver. Once the connector is disconnected, you will have finished removing the front headlamp.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To remove the front headlamp of the Volkswagen Golf 7, loosen the screws securing the grille at the front of the engine and remove it. Next, unscrew …
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today's procedure will show us how to disassemble and replace the front headlight of the Volkswagen Golf, following the instructions below. First, op…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Below we will discover the steps that will allow us to disassemble and replace the front headlight of the Volkswagen Golf. First, we open the hood of…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos