Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wheel Replacement on Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Wheel

Video tutorial

You should have the necessary tools for this operation stored in the boot, beneath the mat. After positioning the jack under the vehicle at the point clearly shown in the video (the point where the car is safely lifted), and before raising it, remove the centre cap using a thin spanner.

Next, loosen the exposed bolts thoroughly.

Now that the bolts are loose, lift the vehicle with the jack and completely unscrew them. Remove the wheel and fit the new one, then simply reverse the process.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Disable Automatic Locking on Volkswagen e-Up!
How to Disable Automatic Locking on Volkswagen e-Up!
Volkswagen Up (2011-2024 / MK 1) In this video, learn how to disable the automatic locking of the doors on a Volkswagen e-Up, as well as on the traditional second-generation Up! (fac…
When Should the Timing Belt be Replaced on the Volkswagen Up?
When Should the Timing Belt be Replaced on the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) The timing belt on the Volkswagen Up, like any other vehicle, must be replaced according to the manufacturer's guidelines, specifically every 75,000 …
How to Open a Stuck Boot on a Volkswagen Up?
How to Open a Stuck Boot on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) On the Volkswagen Up, the boot may get stuck due to a problem with the button or the locking actuator. In these cases, you can still perform an emerg…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos