Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Boot on a Volkswagen Up?

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Checks and maintenance

On the Volkswagen Up, the boot may get stuck due to a problem with the button or the locking actuator. In these cases, you can still perform an emergency opening by following the simple procedure shown in this tutorial. First, open the left rear door, then lower the seatback by operating the relevant lever. Next, go inside the boot compartment, locate the indicated slot, and using a small flathead screwdriver, manually unlock the lock.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Volkswagen Up?
How do you replace the rear headlight bulb of the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) In order to replace the rear headlight bulb of the Volkswagen Up, you will need to open the rear hatch so that you can detach the side panel near the…
Replacement of the rear light bulbs of the Volkswagen Up.
Replacement of the rear light bulbs of the Volkswagen Up.
Volkswagen Up (2011-2024 / MK 1) The instructions in this guide will show us how to disassemble and replace the bulbs of the rear light of the Volkswagen Up. First, let's open the re…
How to Remove and Replace the Engine Air Filter on a Volkswagen Up
How to Remove and Replace the Engine Air Filter on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) See how to remove and replace the engine air filter on a Volkswagen Up. Open and lift the front bonnet (where the engine is located), securing it. Re…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos