Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the rear seat on a VW Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Seat

Do you want to remove the rear seat base of the Up? Let's see how to remove the rear seat base. Detach the plastics that secure the seat base at the point where it meets the backrest (use pliers). After removing one securing plastic, perform the same operations on the other plastics of the rear seat of the car. Once the plastics are removed, pull the seat base upwards with force. Do not damage the securing plastics of the seat base. Before reinstalling the seat, check that the securing plastics are intact.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump on a Volkswagen Up
How to Remove the Fuel Pump on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Remove the fuel pump on a Volkswagen Up. First, lift the engine bonnet and secure it with the prop rod, then remove the engine soundproofing panel an…
Removing the Dashboard and Centre Console on a Volkswagen Up!
Removing the Dashboard and Centre Console on a Volkswagen Up!
Volkswagen Up (2011-2024 / MK 1) In this tutorial, you will learn how to remove the dashboard on a Volkswagen Up, following the instructions below. Get inside the car and start by re…
Removing the Original Radio from a Volkswagen Up!
Removing the Original Radio from a Volkswagen Up!
Volkswagen Up (2011-2024 / MK 1) In this video, you will see the main instructions for removing and replacing the original radio from a Volkswagen Up. First, get inside the vehicle a…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos