Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dashboard and Centre Console on a Volkswagen Up!

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Dashboard

Video tutorial

In this tutorial, you will learn how to remove the dashboard on a Volkswagen Up, following the instructions below. Get inside the car and start by removing the gear knob by unclipping it and lifting it upwards.

Next, use a thin plastic lever to remove all the trim pieces located at the bottom sides, unscrewing the securing screws (using a Torx screwdriver), as shown in the video. At this point, disconnect the 12 V socket by unplugging the connectors underneath, and then remove the glove compartment by unscrewing all the dashboard screws; follow the video until the end for complete disassembly!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Change the Language of the Onboard Computer in a Volkswagen Up?
How to Change the Language of the Onboard Computer in a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) This tutorial shows how to change the language of the onboard computer in a Volkswagen Up, a very simple and quick operation to perform, for example,…
How to reset the TPMS light on the Volkswagen Up
How to reset the TPMS light on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) In the following guide addressed to those of you who own a Volkswagen UP, you will find the description of all the steps you need to follow to comple…
How to Reset the Tyre Pressure Warning Light on the Volkswagen Up
How to Reset the Tyre Pressure Warning Light on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) When the low tyre pressure warning light illuminates on the dashboard, check the inflation of all four tyres and, if necessary, restore the minimum p…

Other guides you may be interested in

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos