Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Tire pressure warning light

When the low tyre pressure warning light illuminates on the dashboard, check the inflation of all four tyres and, if necessary, restore the minimum pressure specified by the manufacturer. Once this is done, you must clear the warning light on the dashboard. To do this, access the driver's seat, locate the button on the central console near the gear lever, press and hold this button for a few seconds until the warning light on the dashboard turns off.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Volkswagen Up
How to Reset the Tyre Pressure Warning Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) When the tyre pressure warning light activates on the dashboard of your Volkswagen Up, it indicates that the pressure in one or more tyres is below t…
How to Reset the Tyre Pressure Monitoring System on the Volkswagen UP!
How to Reset the Tyre Pressure Monitoring System on the Volkswagen UP!
Volkswagen Up (2011-2024 / MK 1) First, you need to know the correct tyre pressure for your Volkswagen UP!. You can find this on the inner side of the driver's door, where the recomm…
How do you reset the tire pressure warning light on the Volkswagen Up?
How do you reset the tire pressure warning light on the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) In order to reset the tire pressure warning light of the Volkswagen Tiguan, you need to inflate the tires to the recommended pressure values: these v…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos