Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Tire pressure warning light

When the tyre pressure warning light activates on the dashboard of your Volkswagen Up, it indicates that the pressure in one or more tyres is below the normal level. To reset this light, start by normalising the pressure using a compressor. After that, sit in the driver's seat and start the engine. Once done, press and hold the "SET" button for the tyre pressure located on the centre console until the light turns off, and you will have completed the reset.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on a Volkswagen Up?
How to reset the tyre pressure warning light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the tyre pressure warning light on a Volkswagen Up, first inflate the tyres to the recommended pressure, which is stated on the sticker loca…
How to Reset the Tyre Warning Light in the Volkswagen Up?
How to Reset the Tyre Warning Light in the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) The tyre warning light, characterised by a flat tyre with an exclamation mark in the centre, illuminates when there is insufficient pressure detected…
How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) In this tutorial, we will see how to reset the service light on a Volkswagen Up, a very simple and quick operation to perform only after completing a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos