Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Volkswagen Up?

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

Video tutorial

To reset the tyre pressure warning light on the Volkswagen Up, first inflate the tyres to the recommended pressure values. These values are found on the sticker attached to the driver's door pillar.

Once the tyres are inflated, enter the cabin and turn on the ignition by inserting the key. Press and hold the SET button located on the centre console. After a few seconds, you will notice the warning light turning off, and you can release the button.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on a Volkswagen Up?
How to reset the tyre pressure warning light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To reset the tyre pressure warning light on a Volkswagen Up, first inflate the tyres to the recommended pressure, which is stated on the sticker loca…
How to Reset the Tyre Pressure Warning Light on a Volkswagen Up
How to Reset the Tyre Pressure Warning Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) When the tyre pressure warning light activates on the dashboard of your Volkswagen Up, it indicates that the pressure in one or more tyres is below t…
How to Reset the Tyre Pressure Warning Light on the Volkswagen E-Up?
Volkswagen Up (2011-2024 / MK 1) To reset the tyre pressure warning light on the Volkswagen E-Up, inflate the tyres to the optimal pressure value: this value is indicated on the stic…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos