Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat from a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Seat

Today, we will go through the instructions that will allow us to remove the front seat from a Volkswagen Golf in simple steps. First, open the front door of the vehicle and start unscrewing all the fastening screws found on the seat rails, moving the seat forwards and backwards to access them; then disconnect the wiring found underneath, thus removing the seat from the cabin, as shown in the video. At this point, carry out the repair or replacement of the front seat, finally adjusting the seat position.

Posted on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat of a Volkswagen Golf
How to Remove the Front Seat of a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Before starting, open the front door of your Volkswagen Golf. Begin by sliding the seat back on its rails, then unscrew the front Torx screws. Next, …
How to Remove the Front Seat of the Volkswagen Golf
How to Remove the Front Seat of the Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) This guide shows the steps to remove and replace the front seat of the driver or passenger in the Volkswagen Golf. First, open the front door and sta…
Removing the Front Seat from a Volkswagen Golf Mk5
Removing the Front Seat from a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video, see how to remove the front seat from a fifth-generation Volkswagen Golf by following these simple steps. First, disconnect the vehicl…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos