Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear headlight bulb of the Volkswagen Up?

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light bulb

Video tutorial

In order to replace the rear headlight bulb of the Volkswagen Up, you will need to open the rear hatch so that you can detach the side panel near the headlight in question: you will find a corresponding knob that needs to be unscrewed in order to remove the optical unit from its housing.

Then you will need to disconnect the connectors below and remove the corresponding bulb from inside the headlight: you can now insert the new one and connect the corresponding connectors, reinserting the headlight and checking its operation.


Posted on 16 March 2025 by ScegliAuto


Related tutorials

When to Replace the Timing Belt on a Volkswagen Up 1.0 MPI
When to Replace the Timing Belt on a Volkswagen Up 1.0 MPI
Volkswagen Up (2011-2024 / MK 1) Today's guide will provide useful information regarding the replacement of the timing belt on a Volkswagen Up 1.0 MPI, as well as on the Seat Mii, Sk…
When Should the Timing Belt be Replaced on the Volkswagen Up?
When Should the Timing Belt be Replaced on the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) The timing belt on the Volkswagen Up, like any other vehicle, must be replaced according to the manufacturer's guidelines, specifically every 75,000 …
How to Replace the Timing Belt on the Volkswagen Up?
How to Replace the Timing Belt on the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) To replace the timing belt on the Volkswagen Up, open the bonnet to access the components inside the engine bay: on the left side, you will find the …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos