Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on the Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

Video tutorial

Today we will see the instructions that will allow us to dismantle and replace the front headlight bulb on the Volkswagen Up. First, open the engine bonnet of the vehicle and start removing the plastic cover of the bulbs; then disconnect the electrical connector by releasing the metal clip to remove the light, as shown in the video.

At this point, install the new dipped beam bulb of the correct type and with the same fitting; replace the other lights in the headlamp unit if necessary, securing the rubber cover and checking the operation of the lights.


Posted on 2 March 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on a Volkswagen Up
Replacing the Front Headlight Bulb on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let's see how to replace the damaged bulb of the front headlight. Lift the front bonnet by pulling the lever located at the bottom right of the dashb…
How to replace the front headlight position bulb of the Volkswagen Up
How to replace the front headlight position bulb of the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the position light bulb of the front headlight of the Volkswagen Up.…
How to Replace the Front Headlight Bulbs on Volkswagen Up
How to Replace the Front Headlight Bulbs on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Have you blown a front headlight bulb? Here’s how to remove them on the Volkswagen Up. Open the front bonnet by pulling the lever located at the bott…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos