Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Position Bulb of the Volkswagen UP

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Light bulb

Video tutorial

In this video, you will learn how to replace the position/daytime light of the Volkswagen UP. It is a 21/5W bulb rated at 12V. Start by opening the front bonnet, placing the metal rod in its slot to keep it open, then locate the connector and disconnect it by rotating the bayonet.

Remove any plastic covers and extract the blown bulb, replacing it with the new one. Test if it works correctly and proceed to reassemble by following the previous steps.

The operation is complete. As we have seen, it is quick and simple, taking only a few minutes.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to replace the front headlight position bulb of the Volkswagen Up
How to replace the front headlight position bulb of the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the position light bulb of the front headlight of the Volkswagen Up.…
How to replace the front headlight bulbs of the Volkswagen UP
How to replace the front headlight bulbs of the Volkswagen UP
Volkswagen Up (2011-2024 / MK 1) To replace the front headlight bulbs of the Volkswagen Up, we need to use a 12 Volt H4 bulb. We open the front hood to access the bulbs and remove th…
How to Change the Headlight Bulb of a Volkswagen Up
How to Change the Headlight Bulb of a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) This video tutorial shows the procedure to replace the bulbs of the front, rear, and interior lights of a Volkswagen Up. To replace the front headlig…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos