Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight position bulb of the Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Headlight bulb

Below we will see the instructions that will allow us to disassemble and replace the position light bulb of the front headlight of the Volkswagen Up. First, we open the hood of the car and start disconnecting the electrical connector of the position light bulb, thus removing the bulb holder; we replace the position light bulb with the new one, of the correct type and with the same attachment. Before reassembling the bulb holder on the headlight unit, we will check its correct operation; in the same way, we will also replace, if necessary, the other daytime running light bulb of the headlight.

Posted on 25 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs of the Volkswagen UP
How to replace the front headlight bulbs of the Volkswagen UP
Volkswagen Up (2011-2024 / MK 1) To replace the front headlight bulbs of the Volkswagen Up, we need to use a 12 Volt H4 bulb. We open the front hood to access the bulbs and remove th…
How to replace the headlight bulb of the VW UP
How to replace the headlight bulb of the VW UP
Volkswagen Up (2011-2024 / MK 1) To replace the headlight bulb of the Volkswagen Up, we need to open the front hood and then disconnect the headlight connector. Then we will need to …
Guide to replacing the headlight bulb of the Volkswagen Up
Guide to replacing the headlight bulb of the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Today we will discover the steps that will allow us to disassemble and replace the headlight bulb of the Volkswagen Up. First, let's open the hood of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos