Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Up
    4. : Removing a headlight on Volkswagen Up

Volkswagen Up - Video tutorial

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Headlight
Operation: Removing a headlight on Volkswagen Up

Let's see how to remove a headlight on Volkswagen Up. We open the bonnet (by pulling the bonnet opening lever) and put it in safety; we unscrew the locking pins on the headlight bar with a socket wrench or cordless screwdriver. At this point we will find other pins in the lower part of the lighthouse: unscrew them from the metal plates (unscrew the pins in the lower part of the stone guard). We detach the lamp holders from the headlight and extract the same from the car body. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. Finally we tighten the pins of the lighthouse with the socket wrench. We test the correct functioning of the lights at the end of assembly.


Posted on 15 November 2023 by ScegliAuto



How to replace the rear headlight bulb of the VW Up
Volkswagen Up (2011-2024 / MK 1) Replacing the rear headlight bulb of the Volkswagen Up has never been so simple, thanks to our short video tutorial that will only take a few minutes
How to replace Volkswagen Up headlight bulbs
Volkswagen Up (2011-2024 / MK 1) Burnt out headlight bulbs? Let's see how to remove them on Volkswagen Up. We open the front hood by pulling the lever located at the bottom right of
How to replace headlight bulbs on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) How to replace headlight bulbs on Volkswagen Up? We follow the disassembly: open the front hood by pulling the lever located at the bottom right of t

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos