Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Volkswagen UP

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

Video tutorial

We open the front hood of the Volkswagen up car to replace its battery. Using a socket wrench and a 13mm extension, we unscrew the battery support plate and remove it. Never disconnect the positive pole because the car is still connected; it is important to first disconnect the negative pole using a 10mm wrench.

We disconnect the positive pole using the 10mm wrench and remove the battery from its housing. We clean the positive and negative connectors with sandpaper to remove rust.

We insert the battery into its housing and connect the positive pole and then the negative pole. We screw the nut on the bracket and mount the plastic cover.


Posted on 9 September 2025 by ScegliAuto


Related tutorials

Replacing the Battery in the Volkswagen Up
Replacing the Battery in the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) In a few simple steps, remove and replace the battery in the Volkswagen Up by following the instructions below. First, open the bonnet of the vehicle…
Replacing the Battery of the Volkswagen Up
Replacing the Battery of the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) In this brief and simple guide, you will learn how to remove and replace the battery of the Volkswagen Up, following the instructions below. First, o…
How to Replace the Battery of the Volkswagen Up
How to Replace the Battery of the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) The following steps will show you the procedure for removing and replacing the battery of the Volkswagen Up, as well as the Skoda Citigo and Seat Mii…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos