Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Battery in the Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

Video tutorial

In a few simple steps, remove and replace the battery in the Volkswagen Up by following the instructions below. First, open the bonnet of the vehicle and disconnect both battery terminals (positive and negative); then, unscrew the battery bracket screw located at the bottom, as shown in the video.

At this point, remove the battery from its compartment and replace it with a new one of the correct type and the same amperage; connect the battery electrically and finally start the engine!


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Volkswagen Up (2011-2024 / MK 1) The following steps will show you the procedure for removing and replacing the battery of the Volkswagen Up, as well as the Skoda Citigo and Seat Mii…
Volkswagen Up (2011-2024 / MK 1) This video shows that if the remote control for opening and closing the doors of the Volkswagen Up no longer functions, and the LED on the casing doe…
Volkswagen Up (2011-2024 / MK 1) In this brief and simple guide, you will learn how to remove and replace the battery of the Volkswagen Up, following the instructions below. First, o…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos