Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

Video tutorial

The instructions in this guide will allow you to disassemble and replace the headlight bulb on a Volkswagen Up. First, open the bonnet and start disconnecting the electrical connector of the bulb located behind the headlamp; then remove the rubber cover and unclip the metal spring to take out the light from the optical unit, as illustrated in the video.

At this point, install the new dipped and main beam bulb with the same fitting; connect the bulb and check its operation, remembering to replace the rubber cover.


Posted on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on Volkswagen Up
How to Replace the Front Headlight Bulbs on Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Have you blown a front headlight bulb? Here’s how to remove them on the Volkswagen Up. Open the front bonnet by pulling the lever located at the bott…
How to Replace the Front Headlight Bulbs on a Volkswagen Up
How to Replace the Front Headlight Bulbs on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) How to replace the front headlight bulbs on a Volkswagen Up? Follow these steps: open the bonnet by pulling the lever located at the bottom right of …
Replacing the Front Headlight Bulb on a Volkswagen Up
Replacing the Front Headlight Bulb on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let's see how to replace the damaged bulb of the front headlight. Lift the front bonnet by pulling the lever located at the bottom right of the dashb…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos