Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Time on a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Clock

Changing the time on your Volkswagen Golf is really simple and takes just a few seconds to complete correctly. First, get inside the vehicle (driver's side) and turn on the ignition. Locate the small button just below the rev counter and press it to display the time on the dashboard screen. Next, press the button located below the speedometer to change the hour. Once finished, press the left button again to switch to minutes and adjust the figure in the same way. Finally, press the menu button once to save the settings.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on a Volkswagen Golf
How to set the time on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Through this very useful video guide today, you will be able to see the entire procedure necessary to change the time on your Volkswagen Golf, fourth…
How to set the time on a Volkswagen Golf 4
How to set the time on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Through this very useful video tutorial today, you will be able to see the step-by-step procedure that will show you how to change the time on the di…
How to change the time on the Volkswagen Golf
How to change the time on the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) These short and simple steps will allow us to change the time on the central display and instrument panel of the Volkswagen Golf. First, we get into …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos