|
Do it yourself
| |||
| ||||
How to Replace the Diesel Filter on the Tiguan 2.0 TDI
Model: Volkswagen Tiguan
5N, MK 1
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
To replace the diesel filter on the Volkswagen Tiguan 2.0 TDI, follow this procedure: first, open the bonnet. Once opened and secured, unscrew the 5 screws on the diesel filter using a Torx socket size 20. After removing these screws, take out the remaining screws on the flange with a star screwdriver. Once all screws are removed, use a flat screwdriver to lever off the filter flange and detach the filter from the cover. At this point, use a flat screwdriver to remove the filter. Once the filter is removed, take off the gasket located under the flange. Next, remove the diesel using a syringe or suction tool, and clean with an absorbent cloth. Now, install the new gasket on the flange, then install the filter, fill it with diesel, and close the flange by re-screwing the screws.
Updated on 24 June 2026 by ScegliAuto
Related tutorials
Volkswagen Tiguan
(2016-2025 /
BW, MK 2, AD)
Below are all the instructions on how to disassemble and replace the timing belt of the Volkswagen Tiguan 2.0 TDI. First, open the bonnet of the vehi…
Volkswagen Tiguan
(2007-2016 /
5N, MK 1)
In this guide, we will see the main steps illustrating the procedure for removing and replacing the timing belt on the Volkswagen Tiguan 2.0 TDI. Fir…
Volkswagen Tiguan
(2016-2025 /
BW, MK 2, AD)
The service on a Volkswagen Tiguan includes an oil change, filters, and service reset. Lift the car and remove the engine cover (held by Torx T25 and…
Other guides you may be interested in |
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |