Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform a Full Service on a Volkswagen Tiguan 1.6 TDI 2018

Model: Volkswagen Tiguan BW, MK 2, AD - Years 2016-2025
Part: Engine oil

The service on a Volkswagen Tiguan includes an oil change, filters, and service reset. Lift the car and remove the engine cover (held by Torx T25 and T45 screws). Unscrew the drain plug (19 mm socket) and allow it to drain. Replace the oil filter (32 mm socket), clean the seating, and lubricate the gasket. Tighten to 25 Nm. The pollen filter is located under the dashboard: remove the flap and insert the new filter, respecting the arrow (downwards). For the air filter, unscrew the cover (Torx T25) and replace the filter. The diesel filter is accessible from the engine bay: unscrew the screws, clean the bowl, and fit the new filter. Tighten to 5 Nm. Top up with 4.7 litres of 5W30 oil. For the service reset, press and hold the button on the dashboard and turn the ignition on. To fill the diesel filter, use the actuator test from the diagnostics and activate the fuel pump. Start the engine. Remember to dispose of the used engine oil and filters properly at an authorised centre.

Posted on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Below are all the instructions on how to disassemble and replace the timing belt of the Volkswagen Tiguan 2.0 TDI. First, open the bonnet of the vehi…
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today’s steps will show you how to remove and replace the timing belt on a Volkswagen Tiguan 2.0 TDI. First, open the engine bonnet and remove the up…
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this guide, we will see the main steps illustrating the procedure for removing and replacing the timing belt on the Volkswagen Tiguan 2.0 TDI. Fir…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos